dunk
New Member
Posts: 1
|
Post by dunk on Mar 26, 2005 8:59:24 GMT -5
i've got an old version of techsoft's wiring and electrical locators (by direct electronics) that i'm running under windows xp home. i'm getting an error message: could not retrieve workstation directory from weldwin.ini i checked the weldwin.ini file and it's there but i don't know how to fix it to get rid of the error. i tried to reinstall but the installation floppy's bad. i tried the www.dei.com website but couldn't find anything to help me. anyone know how to get rid of this error? otherwise can anyone give me the floppy? it's disk 1 of 2 labelled as "techsoft cd installation diskette" and has the numbers: CIS# WEDID12 and 991222001. copyright 1999 mitchell repair information company. thanks for any help
|
|
|
Post by DanD on Mar 26, 2005 15:40:57 GMT -5
I don’t know if this will help or not, but if it was working before you could try and do a restore on the computer to a previous date, when you know it was working. Dan.
|
|
|
Post by way2old on Mar 27, 2005 17:11:30 GMT -5
If you can find the file,open it and look for the part that is missing or an error. You can open the part that is missing and reinstall by right clicking go to properties and install. If it is not corrupted.
|
|
|
Post by T.Wiles on Apr 21, 2005 10:22:47 GMT -5
What u need to do is search google, or download.com and search for weldwin.ini then place it in the specified folder move it there before u load the disk. when u load it and save it to a specified folder when the disk is loaded to it it will skip that file as it is already there. good luck,
Anthony
|
|