|
Post by ibmken on Feb 16, 2005 9:50:19 GMT -5
Requested help in door panel removal and received it from here. Thanks. 2002 Lincoln Town Car. Drivers side window will go down just fine. Going back up is another thing. You have to play with switch for 15-30 seconds before window will go back to top or up. Once you start window back up, you can start/stop upward motion without any problems. If you go back down, same thing.. Switch or motor asm. Ken.....
|
|
|
Post by way2old on Feb 16, 2005 10:58:43 GMT -5
My guess is the switch. Just a guess though. If it takes a while for it to move, the contacts inside are probably not connecting properly. One way to test is to have wiring to motor unplugged and place a test light in connector and see if current is going to motor all the time the switch is depressed. If it is, the motor is probably bad. Do you have the auto down function? If so, there may be a problem in the auto down module also. Try the easiest first. Good luck and thanks for using our little forum.
|
|