|
|
Post by Eric on Feb 28, 2006 16:31:48 GMT -5
engine cranks will not start have replaced both the Cam and Crank sensors, check wires, tuned it up, has no spark but plenty of Fuel injector pulse
it is a V8 4.6 liter
also no error codes come up
|
|
|
|
Post by DanD on Feb 28, 2006 20:45:50 GMT -5
Ohhh Tommm!!!
Excuse me I mean way2old I think Eric needs your input on this one.
Dan.
|
|
|
|
Post by way2old on Mar 1, 2006 9:14:04 GMT -5
Helo Eric. have you checked the fuel pressure? If the injectors are pulsing but there is no fuel, it will not run. If you are positive you have no spark, check all the fuses first. Use a test light to check them. Also check the crank sensor wires to be sure there is no corrosion and they are seated properly on the pins. I have seen them plug in, but the plastic insert will make contact with the sensor pins and cause a no spark. Let us know what you find. And Dan---you told me you were up on FFFFFords   |
|
|
|
Post by way2old on Mar 1, 2006 9:23:39 GMT -5
After looking in the manual, does this vehicle have an anti-theft device? If it does, does the light blink on dash? If light blinks, first try another key. If a different key starts it, you need to purchase and reprogram the key. If it doesn't and the light blinks, we need to check for codes in the PCM. Keep us informed.
|
|
|
|
Post by DanD on Mar 1, 2006 11:55:27 GMT -5
No I definitely don’t know Fords as well as GM; not that GM is better or anything it just seems that there is more of them breaken down at my door step then Fords. LOL
Dan.
|
|
|
|
Post by Eric on Mar 6, 2006 10:40:56 GMT -5
this was the craziest thing I have ever seen, The main wiring harness was burned up, seems as though when it is made it was missing a major plug? they have plastic inserts that go where there are no wires one was missing allowing water to leak in and short out.
Lucky it did not catch on fire.
So Ford had us replace 20 other thing but this ($2000 worth)
then for safety sake we checked the brakes lines rotors wheel bearings, seems as though the right rear was deffective from the factory it was spinning freely . Makes me wonder if the Firestone thing is real may have been the wheel bearings all along. Lucky the rim did not pop off. Whole inside of the Wheel bearing was stripped no star shaped gears what so ever.
email me for pics of the connector if anyone wants to see it
ericdzik1@aol.com
|
|
|
|
Post by way2old on Mar 6, 2006 11:49:49 GMT -5
Hey Eric. If you don't mind, would you post the picture here? Or send it to me and I will post it. Thanks for the fix post.
|
|
|
|
Post by Eric on Mar 7, 2006 13:23:49 GMT -5
send me an email to ericdzik1@aol.com I will reply with the pics
thanks
Eric
|
|
|
|
Post by way2old on Mar 7, 2006 15:19:53 GMT -5
e-mail is in profile
|
|
