Post by Sierra on Oct 16, 2005 8:16:26 GMT -5
I have an '99 Isuzu Rodeo V6 Manual transmission, which has been to the dealer shop 3x's in the last 3 wks only had it home the last three days.
Engine starts with high idle at 2000+rpms. When I shift from 1st to 2nd(or any others), the rpms increase to 3000 until the clutch is left out then back to 2000. When coming to a stop, I push in the clutch and downshift the rpms increse with each downshift and at stop the engine revs and goes to 2000+. Also, if I leave it in gear and slow down with the brakes it will go to low rpms under 2000 but as soon as the clutch is in, it revvs up to 3000. Also revving the engine and/or pulling up on the gas pedal seem to have no effect on the rpms; depressing the clutch pedal a few times seems to have no effect either when at a stop.
I have requested the parts replaced because they were not the problem. I do not know what to do and at a loss of $1000!
Items replaced:
Gasket IN, Gasket COM, Stabilizer, Changed oil & filter, IAC. PCV, Sensor AS, and MOD ( some kind of computer motor).
Engine starts with high idle at 2000+rpms. When I shift from 1st to 2nd(or any others), the rpms increase to 3000 until the clutch is left out then back to 2000. When coming to a stop, I push in the clutch and downshift the rpms increse with each downshift and at stop the engine revs and goes to 2000+. Also, if I leave it in gear and slow down with the brakes it will go to low rpms under 2000 but as soon as the clutch is in, it revvs up to 3000. Also revving the engine and/or pulling up on the gas pedal seem to have no effect on the rpms; depressing the clutch pedal a few times seems to have no effect either when at a stop.
I have requested the parts replaced because they were not the problem. I do not know what to do and at a loss of $1000!
Items replaced:
Gasket IN, Gasket COM, Stabilizer, Changed oil & filter, IAC. PCV, Sensor AS, and MOD ( some kind of computer motor).